It is one of the surfacing methods applied worldwide to prevent small and medium-sized rock falls on slopes. The type and thickness of the nets used vary according to the physical properties of the land. Steel grid nets are used to provide protection in areas such as highways, railways, dams and tunnels. They are generally 6*8 or 8*10 mesh openings with a thickness of 2.7 to 3 mm galvanized coated corrosion-resistant nets that provide long-lasting protection.
During application, steel wire meshes are supported to the surface with anchors and can also be reinforced with steel ropes in line with project requirements. Deformations that may occur over time in surface coating systems with steel wire mesh can be easily repaired by our expert teams.
If there is an area that is larger than the rock fragments, high-capacity ring mesh is used after using low-capacity mesh in these areas. As a result, the intended use of both wires is the same. Steel Wire Nets are frequently preferred in situations where falling rock debris can be retained. Steel grid nets, which are produced as protectors on slope or slope profiles, ensure that the broken rubble or rock fragments fall from behind the net in a safe and controlled manner. Falling rubble or rock fragments come to the heel of the slope and any loss of life or property is prevented.